Go to Main Content

 

 
HELP | EXIT

Osprey Map

 

Transparent Image
For additional information select the HELP link in the upper right of the page.


College: Computing, Engrg, and Const
Degree: Bachelor of Science
Major: Advanced Manufacturing
Effective Term: Fall 2021
The Osprey Map provides a term-by-term sample schedule for each undergraduate academic program at the University of North Florida. It is designed to guide students in the selection of courses each term. The "Mile Marker" courses in the right-hand column are those courses that should be completed before or by the end of that term. Following the sample schedule, and completing the mile marker courses at the appropriate point of your undergraduate career, will facilitate graduation in four years. The term-by-term model assumes full-time enrollment. For students enrolled part-time, the sample schedule and mile markers should be followed based on the number of credits completed. The Osprey Map should be used in consultation with an academic advisor.

Advanced Manufacturing is concerned with materials processes and systems used in the synthesis and production of engineered products. Advanced Manufacturing topics range from traditional methods of fabrication to advanced modeling of automated systems. Typical careers involve production design, development, quality assurance, sales, management, teaching, and research.

Career Planning
Engaging in career planning activities is significant to student success. UNF offers customized career centers to deliver targeted programs, events, services and resources. First-Year and Exploratory students should visit the Career Services webpage and Sophomore or higher level students with a declared CCEC major should visit the CCEC Career Development Center. The Center provides information on companies seeking Advanced Manufacturing graduates for permanent positions or current students for employment in cooperative education positions.

Potential Engineering majors currently in high school should complete classes in Physics, Chemistry and either Precalculus or Calculus.

Students should refer to their personalized Degree Evaluation provided by an academic advisor and to other university resources for additional university and college-specific policies. Visit the undergraduate university catalog for more information.

Summer terms may be utilized to facilitate graduation in four years.

  • Visit the university catalog for a list of General Education requirements. An Associate in Arts (AA) degree from a Florida public university, state college or community college satisfies UNF general education and Gordon Rule requirements. Math selection for First Time in College (FTIC) students is contingent upon Math Placement exam results, the student’s major and credit received through accelerated mechanisms (Advanced Placement, International Baccalaureate, Dual Enrollment, etc).

  • Visit the Advanced Manufacturing Program webpage for a complete list of prerequisites.

  • Students requiring preparation for MAC 2311 Calculus I take MAC 1147 Precalculus. Students without a B grade or higher in High School Chemistry requiring preparation for CHM 2045/2045L General Chemistry I with Lab take CHM 1025/1025L Introduction to Chemistry with Lab. PHY 1028 Introduction to Physics is a prerequisite for PHY 2048C Calculus Based Physics I. MAC 2311 is a prerequisite for PHY 2048C. Beginning the mathematics and science sequences immediately is crucial to stay on-track for graduation.

  • Satisfactory academic progress for Advanced Manufacturing students requires completion of courses in Milestone 1: Calculus I, Calculus II, Physics I with Lab and General Chemistry I with Lab with an aggregate GPA of 2.0 by completion of their third UNF term including summer terms. Students not completing Milestone 1 with an aggregate GPA of 2.0 will be placed under academic probation in the School of Engineering and have an advising hold placed on their record. After the sixth UNF term, students must complete Milestone 1 as well as courses in Milestone 2: Calculus III, Ordinary Differential Equations and Physics II with Lab with an aggregate GPA of 2.0 or they will be suspended from the School of Engineering and must change majors. A student is allowed to change major from an engineering program with a higher aggregate GPA to an engineering program with a lower aggregate GPA. Find specific admission criteria for this program on your Degree Evaluation, college website, university catalog or consult your academic advisor. For more information visit the School of Engineering Advising Office webpage.

  • The School of Engineering enforces a One Repeat Rule for all prerequiste courses (those found under Milestone 1 and 2) and all core engineering courses. Students who do not successfully complete a prerequisite or core requirement for a School of Engineering course on the first attempt (i.e., earn a grade of D, F, or W) must repeat the course. The course must be passed with a C or better on the second attempt or the student will be suspended from the engineering program and not allowed to continue in that engineering program. The only exceptions to this policy are withdrawals for medical, military and fully refunded withdrawals (i.e., WM, WS and WR, respectively). Find specific admission criteria for this program on your Degree Evaluation, college website, university catalog or consult your academic advisor. For more information visit the School of Engineering Advising Office webpage.

  • All Engineering courses are typically offered once a year and should be completed in the Term indicated on the Osprey Map. For additional information consult an academic advisor.

  • Civic Literacy Requirement: Prior to graduation from a Florida state university, students must demonstrate competency in civic literacy through successful completion of a civic literacy course (AMH 2020 or POS 2041) and by achieving a passing score on an assessment. Consult an academic advisor, the university catalog and visit the Civic Literacy webpage for additional information.

  • A minimum of 120 hours (48 hours at the upper 3000/4000 level) is required for the bachelor's degree.
 
Term 1: Attempted Hours 0-15
Schedule Credit Hours   Mile Markers
ENC1101 (GW) Audience and Purpose 3   MAC2311 Calculus I Minimum Grade C
   
MAC2311 (GM) Calculus I (Program Prerequisite) 4  
   
CHM2045 General Chemistry I (Program Prerequisite) 3  
CHM2045L General Chemistry I Laboratory (Program Prerequisite) 1  
   
PHY1028 Introduction to Physics (Not a Program 2  
Prerequisite, but PHY1028 is a prerequisite for  
PHY2048C Calculus Based Physics I with Lab. Students  
may contact the Physics Department for alternatives  
to satisfy this prereq requirement to PHY2048C.)  
   
Select a General Education Course (See Degree Evaluation) 3  
   
Total Hours: 16
 
Term 2: Attempted Hours 16-30
Schedule Credit Hours   Mile Markers
EGN1001C Introduction to Engineering I 2   MAC2312 Calculus II Minimum Grade C
    Physics I with Laboratory Minimum Grade C
MAC2312 (GM) Calculus II (Program Prerequisite) 4   EGN1001C Intro to Engineering I Minimum Grade C
   
PHY2048C Calculus Based Physics with Lab (Program Prereq) 4  
   
Select a General Education Course (See Degree Evaluation) 3  
   
Total Hours: 13
 
Summer 1
Schedule Credit Hours   Mile Markers
ENC3246 Prof. Comm: Engineering 3   General Chemistry I with Laboratory Minimum Grade C
   
Completion of Milestone 1: Calculus I, Calculus II,  
Physics I with Lab and General Chemistry I with Lab with  
an aggregate GPA of 2.0 is required by the third term at  
UNF to avoid being placed on academic probation by the  
School of Engineering  
   
Total Hours: 3
 
Term 3: Attempted Hours 31-45
Schedule Credit Hours   Mile Markers
MAC2313 (GM) Calculus III (Program Prerequisite) 4   MAC2313 Calculus III Minimum Grade C
    Physics II with Laboratory Minimum Grade C
PHY2049 Calculus-Based Physics II (Program Prerequisite) 3   EGN3311 Statics Minimum Grade C
PHY2049L Calculus-Based Physics II Lab (Program Prerequisite) 1  
   
EML3535C Modern Engineering CAD 2  
   
EMA3010 Intro to Materials Science 3  
   
EGN3311 Statics 3  
   
Total Hours: 16
 
Term 4: Attempted Hours 46-60
Schedule Credit Hours   Mile Markers
MAP2302 (GM) Ordinary Differ Equations (Program Prerequisite) 3   EIN3390 Materials Processing Minimum Grade C
    EGN3321 Dynamics Minimum Grade C
EIN3390 Materials Processing 3   EMA4502 Materials Characterization Minimum Grade C
   
EGN3321 Dynamics 3  
   
EEL3111 Circuit Analysis I 3  
   
EMA4502 Materials Characterization 3  
   
Total Hours: 15
 
Summer 2
Schedule Credit Hours   Mile Markers
STA3032 (GM) Prob/Statistics for Engrs 3  
   
Completion of Milestone 2: Calculus III, Ordinary  
Differential Equations and Physics II with Lab  
by the sixth term at UNF to avoid being  
placed on academic suspension by the  
School of Engineering  
   
Total Hours: 3
 
Term 5: Attempted Hours 61-75
Schedule Credit Hours   Mile Markers
EML4320C Integrated Design/Manufacture 3   MAP2302 Ordinary Differ Equations Minimum Grade C
    EEL3111 Circuit Analysis I Minimum Grade C
ESI4221C Quality Analy and Quality Cont 3   EML4320C Integrated Design/Manufacture Minimum Grade C
    EGN3331 Strength of Materials Minimum Grade C
EIN3003 Fundamentals of Industrial Eng 3  
   
EGN3331 Strength of Materials 3  
   
   
Total Hours: 12
 
Term 6: Attempted Hours 76-90
Schedule Credit Hours   Mile Markers
EIN3800 Subtractive Manufacturing 3   EIN3800 Subtractive Manufacturing Minimum Grade C
    EIN3800L Subtractive Manufacturing Lab Minimum Grade C
EIN3800L Subtractive Manufacturing Lab 1   EIN3304 Thermofluids for Manufacturing Minimum Grade C
    EML4501 Machine Design Minimum Grade C
EIN XXXX Technical Elective (See list of Elective options 3   EIN3621 Computer Aided Manufacturing Minimum Grade C
on Degree Evaluation or in the university catalog)   Civic Literacy Requirement
   
EIN3304 Thermofluids for Manufacturing 3  
   
EML4501 Machine Design 3  
   
EIN3621 Computer Aided Manufacturing 3  
   
Total Hours: 16
 
Summer 3
Schedule Credit Hours   Mile Markers
Select a General Education Course (See Degree Evaluation) 3  
   
Total Hours: 3
 
Term 7: Attempted Hours 91-105
Schedule Credit Hours   Mile Markers
EIN3801 Additive and Netshape Manufact 3   EIN3801 Additive and Netshape Manufact Minimum Grade C
    EIN3801L Additve and Netshape Mfg Lab Minimum Grade C
EIN3801L Additve and Netshape Mfg Lab 1   EML4551 Senior Capstone Design I Minimum Grade C
    EIN4602C Control of Machinery for Manf Minimum Grade C
EIN XXXX Technical Elective (See list of Elective options 3  
on Degree Evaluation or in the university catalog)  
   
EML4551 Senior Capstone Design I (Offered Fall term only) 3  
   
EIN4602C Control of Machinery for Manf 3  
   
Total Hours: 13
 
Term 8: Attempted Hours 106-120
Schedule Credit Hours   Mile Markers
EIN XXXX Technical Elective (See list of Elective options 3  
on Degree Evaluation or in the university catalog)  
   
EML4552 Senior Capstone Design II (Offered Spring term only) 3  
   
EIN 4518 Systems Integration 3  
   
Select a General Education Course (See Degree Evaluation) 3  
   
Total Hours: 12
Total Program Hours: 120
The Osprey Map is not a contract between the University of North Florida and the student. It should be used as a general guide for the purpose of meeting requirements and constructing course schedules. The Map may be altered periodically to meet the objectives of the academic program or the university.

Transparent Image
Skip to top of page
Release: 8.7.2